| US Imports of Steel Mill Products | |||
| FROM NEW ZEALAND | |||
| Quantity in Metric Tons | |||
| Same Table - Monthly Average US Dollars |
Same Table - Average Unit Value |
||
| Same Table - Annual Total Metric Tons |
Same Table - Annual Total US Dollars |
||
| 'C & A' = Carbon and Alloy products, 'S' = Stainless products | |||
| Product | Census Data | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Monthly Average Quantity 2005 |
Monthly Average Quantity 2006 |
Monthly Average Quantity 2007 |
Monthly Average Quantity 2008 |
Monthly Average Quantity 2009 |
Monthly Average Quantity 2010 |
Monthly Average Quantity 2011 |
Monthly Average Quantity 2012 |
Monthly Average Quantity YTD Jan through Mar 2012 |
Monthly Average Quantity 2013 (through March final) |
|
| All Steel Mill Products | ||||||||||
| All Steel Mill Products | 5,961 | 11,706 | 9,785 | 5,536 | 4,030 | 7,590 | 10,109 | 8,301 | 9,610 | 8,788 |
| Carbon and Alloy Products | ||||||||||
| All Carbon and Alloy Products | 5,961 | 11,706 | 9,785 | 5,536 | 4,030 | 7,590 | 10,109 | 8,301 | 9,610 | 8,788 |
| Sheets Hot Rolled -- C & A | 3,481 | 7,134 | 6,079 | 3,392 | 2,507 | 4,822 | 6,649 | 5,438 | 6,179 | 5,901 |
| Plates in Coils -- C & A | 1,028 | 2,635 | 2,936 | 1,659 | 868.2 | 1,792 | 2,307 | 1,995 | 2,395 | 1,787 |
| Sheets Cold Rolled -- C & A | 783.2 | 966.7 | 750.3 | 473.4 | 632.9 | 964.4 | 1,147 | 864.7 | 1,032 | 1,088 |
| Plates Cut Lengths -- C & A | 26.4 | . | . | . | 12.4 | 9.81 | 5.11 | 1.85 | 2.96 | 10.7 |
| Wire Drawn -- C & A | 2.83 | 4.15 | 18.7 | 11.5 | 5.42 | 0.21 | 0.05 | 1.32 | . | 0.83 |
| Mechanical Tubing -- C & A | 0.10 | 2.20 | . | . | 0.01 | . | . | . | . | . |
| Sheets & Strip Galv Electrolyt -- C & A | . | 20.5 | . | . | . | . | . | . | . | . |
| Sheets & Strip Galv Hot Dipped -- C & A | 2.96 | 108.3 | . | . | 4.52 | 1.59 | . | . | . | . |
| Wire Rods -- C & A | 635.9 | 834.5 | . | . | . | . | . | . | . | . |
| Stainless Products | ||||||||||
| All Stainless Products | 0.13 | 0.35 | . | 0.01 | 0.06 | 0.04 | . | . | . | . |
| Blooms, Billets and Slabs -- S | 0.13 | 0.35 | . | 0.01 | . | . | . | . | . | . |
| Plates in Coils -- S | . | . | . | . | . | 0.04 | . | . | . | . |
| Sheets Hot Rolled -- S | . | . | . | . | 0.06 | . | . | . | . | . |
| SOURCE: US Department of Commerce, Import Administration |
| Table last modified on: May 2, 2013 , with |
| Final Census data compiled through March 2013 |
| Data listed in order of descending volume imported during the year - 2012 |
| Steel mill categories are defined by 10-digit HTS codes |
| Data extracted from the import licenses are not official Census data |
| To see License Data at HTS 6-digit level click on chart title at the top of the page. |
| Link to Monthly Display of Census Data |
| Link to Summary Level of Monthly Census Data |