| US Imports of Steel Mill Products | |||
| FROM SLOVAKIA | |||
| Quantity in Metric Tons | |||
| Same Table - Monthly Average US Dollars |
Same Table - Average Unit Value |
||
| Same Table - Annual Total Metric Tons |
Same Table - Annual Total US Dollars |
||
| 'C & A' = Carbon and Alloy products, 'S' = Stainless products | |||
| Product | Census Data | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Monthly Average Quantity 2003 |
Monthly Average Quantity 2004 |
Monthly Average Quantity 2005 |
Monthly Average Quantity 2006 |
Monthly Average Quantity 2007 |
Monthly Average Quantity 2008 |
Monthly Average Quantity 2009 |
Monthly Average Quantity 2010 |
Monthly Average Quantity 2011 |
|
| All Steel Mill Products | |||||||||
| All Steel Mill Products | 3,068 | 1,353 | 1,206 | 4,538 | 891.3 | 595.3 | 145.5 | 448.8 | 6,387 |
| Carbon and Alloy Products | |||||||||
| All Carbon and Alloy Products | 3,067 | 1,351 | 1,202 | 4,518 | 856.1 | 585.8 | 145.5 | 448.6 | 6,385 |
| Blooms, Billets and Slabs -- C & A | . | . | . | 3,689 | . | . | . | . | 5,952 |
| Line Pipe -- C & A | 422.0 | 499.7 | 362.9 | 327.2 | 423.5 | 213.2 | 67.2 | 368.1 | 337.5 |
| Standard Pipe -- C & A | 44.7 | 35.9 | 70.9 | 14.2 | 95.4 | 94.8 | 7.85 | 38.4 | 42.1 |
| Wire Drawn -- C & A | 7.16 | . | 3.52 | 1.61 | 10.0 | 4.68 | 18.6 | 5.70 | 37.3 |
| Mechanical Tubing -- C & A | 16.0 | 3.44 | 17.7 | 38.7 | 23.4 | 2.45 | 0.15 | 17.9 | 13.6 |
| Plates Cut Lengths -- C & A | 64.1 | 45.6 | 205.1 | 124.3 | 72.4 | 65.4 | 2.65 | 8.54 | 1.36 |
| Pressure Tubing -- C & A | 312.0 | 434.6 | 397.5 | 137.5 | 166.5 | 183.7 | 33.9 | 3.26 | 0.35 |
| Sheets Hot Rolled -- C & A | 1,394 | 39.6 | 103.3 | 151.1 | 63.0 | 21.3 | 14.9 | 6.56 | 0.30 |
| Bars-Hot rolled -- C & A | 27.1 | 290.5 | . | . | . | . | . | . | . |
| Ingots and Steel for Castings -- C & A | 0.03 | . | 0.01 | 0.43 | . | . | . | . | . |
| Oil Country Goods -- C & A | . | 0.88 | 33.1 | 33.4 | . | . | . | . | . |
| Plates in Coils -- C & A | 224.6 | . | . | . | . | . | . | . | . |
| Sheets & Strip Galv Hot Dipped -- C & A | 22.4 | . | . | . | . | . | . | . | . |
| Sheets & Strip-Electrical -- C & A | 1.18 | . | 6.93 | . | 1.69 | . | . | . | . |
| Sheets Cold Rolled -- C & A | 532.1 | . | . | . | . | . | . | . | . |
| Structural Pipe & Tube -- C & A | . | . | . | 0.02 | . | . | . | . | . |
| Tool Steel -- C & A | . | 1.31 | 1.57 | . | . | . | . | . | . |
| Stainless Products | |||||||||
| All Stainless Products | 0.32 | 1.55 | 3.79 | 20.1 | 35.1 | 9.52 | 0.01 | 0.17 | 2.35 |
| Stainless Pipe & Tubing -- S | 0.32 | 1.25 | 3.29 | 20.1 | 29.5 | 9.52 | . | 0.17 | 2.35 |
| Ingots and Steel for Castings -- S | . | 0.30 | 0.50 | . | . | . | . | . | . |
| Oil Country Goods -- S | . | . | . | . | . | . | 0.01 | . | . |
| Plates Cut Lengths -- S | . | . | . | . | 5.62 | . | . | . | . |
| SOURCE: US Department of Commerce, Import Administration |
| Table last modified on: February 10, 2012 , with |
| Final Census data compiled through December 2011 |
| Data listed in order of descending volume imported during the year - 2011 |
| Steel mill categories are defined by 10-digit HTS codes |
| Data extracted from the import licenses are not official Census data |
| To see License Data at HTS 6-digit level click on chart title at the top of the page. |
| Link to Monthly Display of Census Data |
| Link to Summary Level of Monthly Census Data |